Haier Monoblock Heat Pump Hot Water System
Reliable Hot Water with Smarter Efficiency
The Haier Monoblock heat pump water heater range combines efficiency, convenience, and smart technology. Available in 200L, 250L, and 330L tank sizes, it’s designed to reduce energy use by up to 79% compared to traditional electric water heaters. Using natural R290 refrigerant, these systems are eco-friendly and operate in a wide temperature range from -7°C to 45°C. With built-in WiFi and the SmartHQ™ app, you can adjust heating schedules, switch between modes, and optimise solar PV use from your smartphone. Quiet operation, quick installation, and durable tank design make the Monoblock range a dependable upgrade for households across Australia.
Why Choose a Haier Monoblock?
Energy Efficient
Uses 69–79% less electricity than standard electric hot water systems, cutting your power bills significantly.
Smart Control
WiFi-enabled with the SmartHQ™ app, allowing you to choose between five heating modes including Eco and Solar PV.
Eco-Friendly Refrigerant
Runs on natural R290 refrigerant, with a global warming potential 476 times lower than R134A.
Flexible Sizing
Choose from 200L, 250L, or 330L tanks to match your household size and hot water needs.
Easy Installation
Designed to fit the same footprint as a traditional electric unit, making replacement straightforward.
Quiet & Durable
Operates quietly at 43–47 dB and features a corrosion-resistant tank tested for long-term reliability.
HOW IT WORKS
- 1. Heat CapturedThe system draws in surrounding air and extracts heat energy.
- 2. Energy TransferThe R290 refrigerant absorbs and compresses this heat, raising its temperature.
- 3. Water HeatedHeat is transferred into the storage tank, efficiently warming the water.
- 4. Stored & ReadyHot water is stored in the insulated tank, available whenever your household needs it.
Claim Savings with Haier Monoblock Rebates
Installing a Haier Monoblock heat pump qualifies you for government rebates that make energy-efficient hot water more affordable. In South Australia, the Retailer Energy Productivity Scheme (REPS) offers instant discounts when you replace older electric or gas systems with efficient technology. The federal Small-scale Technology Certificates (STCs) scheme also rewards households by assigning a rebate value to each system, based on performance and your installation zone.
Together, these programs can save households between $800 and $1,200 off the upfront cost of a Haier Monoblock system. At Adelaide West Hot Water, we manage all the rebate paperwork and apply the savings as an instant discount, so you only pay the reduced price on installation day.
Haier Monoblock FAQ's
What is the warranty on the Haier Monoblock?
What is the lifespan of the unit?
Are there recommended settings for the unit?
Have another specific question? Give us a call or contact us via email and we can help you out!
How does the Haier Monoblock save you money?
The Haier Monoblock heat pump hot water system saves you money by using efficient heat pump technology to extract renewable heat from the air, reducing electricity consumption compared to conventional electric systems. This can lower hot water energy costs by up to 70%, helping cut household power bills year-round. The system is designed to operate efficiently with solar power and off-peak electricity tariffs, maximising savings where available. Eligible government rebates and STCs can significantly reduce the upfront installation cost, while Haier’s reliable engineering and durable components help minimise maintenance and replacement expenses over the system’s lifespan.
Haier Monoblock Specifications
Haier Monoblock – 200L Specifications
| Haier Monoblock Heat Pump – 200L (HP200M1-U1) | |
|---|---|
| Tank Capacity (Total water capacity) | 195 L |
| Refrigerant | R290 |
| Refrigerant Mass | 0.34 kg |
| Ambient Operating Range | -7°C to 45°C (heat pump / total appliance) |
| Max Water Temp | 65°C (heat pump), 75°C (total appliance) |
| Noise Emissions | 43 dB |
| Anode Type | Magnesium |
| Ingress Protection | IP24 |
| Power Supply | 220–240 V / 50 Hz |
| Rated Power Input (Heat pump) | 0.43 kW |
| Maximum Power Input (Heat pump) | 0.75 kW |
| Electric Element Power Input | 1.5 kW |
| Maximum Power Input (Total appliance) | 2.25 kW |
| Dimensions (W × D × H) | 600 × 630 × 1658 mm |
| Weight (empty) | 91 kg |
| Weight (filled) | 286 kg |
| Warranty | 7 years (inner cylinder), 5 years (parts & labour) |
Haier Monoblock – 250L Specifications
| Haier Monoblock Heat Pump – 250L (HP250M1-U1) | |
|---|---|
| Tank Capacity (Total water capacity) | 246 L |
| Refrigerant | R290 |
| Refrigerant Mass | 0.34 kg |
| Ambient Operating Range | -7°C to 45°C (heat pump / total appliance) |
| Max Water Temp | 65°C (heat pump), 75°C (total appliance) |
| Noise Emissions | 43 dB |
| Anode Type | Magnesium |
| Ingress Protection | IP24 |
| Power Supply | 220–240 V / 50 Hz |
| Rated Power Input (Heat pump) | 0.43 kW |
| Maximum Power Input (Heat pump) | 0.75 kW |
| Electric Element Power Input | 1.5 kW |
| Maximum Power Input (Total appliance) | 2.25 kW |
| Dimensions (W × D × H) | 600 × 630 × 1951 mm |
| Weight (empty) | 106 kg |
| Weight (filled) | 352 kg |
| Warranty | 7 years (inner cylinder), 5 years (parts & labour) |
Haier Monoblock – 330L Specifications
| Haier Monoblock Heat Pump – 330L (HP330M1U1) | |
|---|---|
| Tank Capacity (Rated / Total) | 330 L rated / 331 L total |
| Refrigerant | R290 |
| Refrigerant Mass | 0.47 kg |
| Ambient Operating Range | -7°C to 45°C (heat pump / total appliance) |
| Max Water Temp | 65°C (heat pump), 75°C (total appliance) |
| Noise Emissions | 47 dB |
| Anode Type | Magnesium |
| Ingress Protection | IP24 |
| Power Supply | 220–240 V / 50 Hz |
| Rated Power Input (Heat pump) | 0.43 kW |
| Power Input Range (Compressor) | 0.2 to 1.2 kW |
| Electric Element Power Input | 2.2 kW |
| Maximum Power Input (Total appliance) | 3.4 kW |
| Dimensions (W × D × H) | 710 × 758 × 1941 mm |
| Weight (empty) | 122 kg |
| Weight (filled) | 452 kg |
| Warranty | 7 years (inner cylinder), 5 years (parts & labour) |
Haier Monoblock Documentation
Ready to save money on hot water?
We install heat pump hot water systems across Adelaide - start saving today!
Local Adelaide team on call
SA REPS & STC rebates handled
Save up to 70% on hot water